Shop closed for walk-ins - Click and Collect only, use website for purchases.
Full info on repairs / collections etc on status / coronavirus page.

mCubed T Balancer Flowmeter 3.3mm Jet

(£22.43 inc VAT)
Short description:
Flowmeter Kit (Requires Sensor Hub)
Click and Collect Info - Click add to cart, checkout, fill out your address and choose 'Collect From Shop' as the delivery method. Most orders ready in a few minutes.

Full info including detailed instructions, operating hours and location / parking info here - Shop Collection Info

With the T-Flow we offer a flowmeter with a good measuring range at low pressure losses. You can connect up to 2 flowmeters. To improve measurement results you can choose in the T-Balancer software different measurement ranges. For the T-Flow the range "4sec" applies.

Model: plastic, white
Jet: 3.3 mm
Impulse per litre: 509 (with software calibratible)
Maximum flow: 6 l/min
Magnets: Ceramic Sr Fe O
Temperature range: -10?C to +65?C
Winding G1/4"
Connection: 3Pin-Molex (female)

With the T-Flow flowmeter you can automatically monitor liquid speed and you can define temperature and liquid speed limits, which lead to an emergency switch-off.

Please note this requires an Analogue TBalancer (with Sensor Hub). Users of a Digital TBalancer should order a Sensor hub to allow connection of watercooling parts.

If you want to use this with a 10mm watercooling setup, please purchase two of these 1/4" Barb to 10mm adapters.


Please choose your location for calculate shipping cost.