The Alphacool HT Compression fitting is a true masterpiece. These connectors promise absolute tightness and high quality.
Suitable for all hard metal tubes with an outer diameter of 12mm. On the other side of the connector it is as usual the ¼ "thread. Available in Deep Black and Chrome.
First, we put the union nut onto the tube, this is followed by a plastic disc which protects the O-ring and thick O ring itself. Now the tube is easily inserted into the connector in the already the second O-ring is seated rests very close to the tube. As a final step, the union nut is pushed and screwed on the connection.
The bottom of the compression fitting can be easily tightened by using an 8mm Allen key.
Scope of supply:
1x Alphacool HT 12mm HardTube compression fitting G1/4
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.