Under the label "Coolforce - powered by Nanoxia“ we present selected components for demanding water cooling and modding enthusiasts.
We offer you a broad variety of straight and angled connectors and screw caps for every demand. Using those makes it very easy to lay out your tubing inside your system as desired. Our fittings are of the highest grade and offer outstanding quality. Sealing rings ensure that the fittings are permanently sealed.
This barb fitting is ideally suited to connect our CF 16/13 mm PETG tubes (or any other acrylic tubes with identical dimensions) and components with a G 1/4 inner thread in a water cooling circuit. The nut is used for stability and ensures an attractive appearance. The fitting comes with a specially designed LED light with 6 LEDs included. The PETG tubes are continuously illuminated by the LEDs and shine in the respective color. The LEDs illuminate specifically the cut surface of the PETG tubes and thus achieve a particularly impressive luminosity.
The advantage of this set-up is obvious. You don’t need to illuminate your complete case with LED stripes, and you don’t have to ever use UV lights again. The lightning of the tube is very selective and allows you to illuminate only the parts you chose. Even when using a neutral color, like white, you can achieve a very beautiful result with our fittings.
The fitting has a cable duct to provide the LED ring correctly with power. The LED ring is powered by a 3-pin Molex cable and can be dimmed via a compatible fan controller.
Please note: These connectors are designed especially for the CoolForce PETG tubes (or acrylic tubes with identical dimensions)! Please do not use these ports for conventional PVC tubing.
Model: CF Hard Tube LED G1/4" to 16 mm Ø
Diameter: 20 mm
Length: 25 mm