• Shop Open Monday to Friday 10am-6pm, Sat 10am-5pm 
 

Kolink Nimbus RGB Midi Tower Case - Black

£38.00
(£45.60 inc VAT)
Short description:

ATX / Micro-ATX / Mini-ITX Tower, No PSU

Tempered Glass Side

0219
+
Click and Collect Info - Click add to cart, checkout, fill out your address and choose 'Collect From Shop' as the delivery method. Orders for stock items ready for pickup within minutes (note that items like computers requiring setup take longer).

Full info including detailed instructions, operating hours and location / parking info here - Shop Collection Info
Cutting a striking figure amongst the highly competitive ATX-format segment, the Nimbus Midi-Tower from Kolink offers an ARGB-LED strip rounding the large cut-out in the front - enabling a significant improvement in airflow. The hardware installed inside the case will also remain clear of dust thanks to the filter, which is important as users will also enjoy the opportunity to admire their hard-earned hardware through the tempered glass side. In spite of Kolink's use of solid tempered glass, the Kolink Nimbus still weighs only 4,58 Kg. The generous dimensions of the case not only help with airflow, they also allow users to install motherboards up to ATX in form factor. Graphics cards up to 325 mm long are compatible - meaning that the case is perfect for housing some seriously high-end gaming hardware.

The Features of the Kolink Nimbus Midi-Tower at a Glance

  • Designer case in black for motherboards up to ATX
  • Large air inlet in the front with ARGB-LED surround for better airflow
  • Magnetic dust filters on the front, roof and bottom
  • 4 mm thick tempered glass side panel
  • 1x Pre-installed 120 mm fan, 6 possible in total
  • I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out, RGB-LED controller
  • Support for radiators up to 240 mm in front and roof
  • 2x 3,5/2,5" drive slots, 2x slots for 2,5" drives on motherboard tray
  • Supports graphics cards up to 32,5 cm long & CPU coolers up to 16 cm

Tempered Glass Side Panel & Pre-Installed Fan

The robust chassis consists of one millimetre thick SECC steel and includes a four millimetre thick tempered glass side panel, with an aluminium-look plastic front. A large cut-out in the front has a digitally addressable RGB-LED strip included which can be both synced to compatible 3-Pin motherboards and controlled on the front panel. The magnetic dust filter located behind it helps keep the interior clean and dust free and allows for sufficient airflow.

The interior has a black coating and utilises a power supply shroud to help maintain a clean aesthetic. Beneath this, users will find a non-removable drive cage with brackets for two 3,5- or 2,5" drives as well as space for the power supply itself. Two additional slots for 2,5" drives are located to the rear of the motherboard tray.

Dust Filters Keep the Kolink Nimbus Clean

In order to keep your gaming hardware supplied with a continuous stream of cool, fresh air - one (of a possible total of six) 120 mm fan in black is included with the case and installed in the rear. The front of the case supports up to three 120 mm fans, the roof of the case allows for two further 120 mm fans. The front of the case supports two 140 mm fans.

A 240 mm radiator can be installed in the front and the roof. The motherboard tray and the PSU cover include various openings for all the cable management options you could ask for. The air inlets located in the roof and underside of the case also include a fine mesh. These are magnetic and utilise a honeycomb-structure design to add strength.

Graphics cards up to 32,5 cm with CPU coolers up to 16 cm are both supported. Additionally, the I/O panel located on the front of the case includes two USB 2.0 ports along with a USB 3.0 Type-A port. A switch for controlling the RGB lighting is also available.

 

 
Dimensions W D H
210mm 370mm 440mm
Fans Included:
1x 120 mm (rear, 3-Pin)
Fan Support:
3x 120 mm / 2x 140 mm (Front)
2x 140 / 120 mm (roof)
1x 120 mm (rear)
Radiator Support 1x 240 mm (front)
1x 240 mm (roof)
5"1/4 Bays 0
3"1/2 Bays 2x 3,5 (also support 2,5") (internal)
2"1/2 Bays 2 x dedicated 2,5" (internal, reverse of motherboard tray
Motherboard ATX, Micro-ATX, Mini-ITX
Power Supply 1x Standard ATX to 180 mm (optional)
Material Steel, tempered glass, plastic
CPU Cooler Max Height 160mm
Window 4 mm thick tempered glass side panel - right side
Graphics Support Max 325mm Length
Vertical Graphics -
Expansion Slots 7 Horizontal
Hubs RGB LED Control
Connectors 2x USB 2.0 (internal connection)
1x USB 3.0 (internal connection)
1x Audio In/Out
1x RGB-LED Control

 

Colour:
Black
Width:
210mm
Depth / Length:
370mm
Height:
440mm
GTIN:
5999094003149
MPN:
NIMBUS RGB

New features

Manufacturer:
Kolink

Cases

Case Form Factor:
ATX
Graphics Card Support:
375mm
Case Window:
Tempered Glass Side
Case Lighting:
RGB Lighting
Case Slim Optical Bay:
Case 5"1/4 Bays:
0
Case 3"1/2 Bays:
2
Case Dedicated 2"1/2 Bays:
2
+

Please choose your location for calculate shipping cost.

Customers also bought