Shop Open from 10am-5.30pm Monday to Saturday

Lian Li PC-O11 Dynamic XL Full Tower Case Black Tempered Glass

£199.17
(£239.00 inc VAT)
Short description:

ATX / EATX Tower, No PSU

Tempered Glass Side and face

0103
+
Click and Collect Info - Click add to cart, checkout, fill out your address and choose 'Collect From Shop' as the delivery method. Orders for stock items ready for pickup within minutes (note that items like computers requiring setup take longer).

Full info including detailed instructions, operating hours and location / parking info here - Shop Collection Info

Bigger in every way a mighy powerful chassis. Modular design flexiblity for any configuration. Hot swappable drives.spacious for multiple and bigger components.Seamlessly supporting E-ATX motherboards.RGB lighting sync front panel addressable RGB.
Tempered Glass on the Front, and Left Side. E-ATX ,ATX Full Tower Gaming Computer Case

 

 
Dimensions W D H
285mm 471mm 513mm
Fans Included:
None
Fan Support:
3x 120 mm or 2 x 140mm (bottom)
3x 120 mm or 2 x 140mm (top)
1x 120mm (rear)
3x 120 mm (side, front)
Radiator Support (Forfeits fan slots)
1x max. 360 or 280 mm (top) 
1x max. 360 or 280 mm (bottom) - 
1x max. 360 mm (side, front) 
1x 120mm back
5"1/4 Bays 0
3"1/2 Bays 4 x 3"1/2, Also Support 2"1/2
2"1/2 Bays 6 Dedicated
Motherboard EATX, ATX, Micro-ATX, ITX
Power Supply ATX, up to 220mm length
Material Steel, aluminium, tempered glass windows
CPU Cooler Max Height 167mm
Window Tempered Glass Right Side & Face
Graphics Support Max 446mm Length
Vertical Graphics -
Expansion Slots 8
Connectors USB 3.0 Type C x 1 
USB 2.0 x 4
Mic / Audio

 

MODULAR DESIGN
FLEXIBILITY FOR ANY CONFIGURATION

 

HOT SWAPPABLE DRIVES

for replacement or addition of storage without shutting down the system

 

SPACIOUS FOR MULTIPLE AND BIGGER COMPONENTS

(D) 471 x (W) 285 x (H) 513mm

EASIER BUILT PROCESS
EFFORTLESS CABLE MANAGEMENT

SEAMLESSLY SUPPORTING
E-ATX MOTHERBOARDS

Extension bar (optional) enables support for the rog dominus extreme

 

RGB LIGHTING SYNCH
FRONT PANEL ADDRESSABLE RGB

Built-in rgb effect controlled by the front panel m|c buttons to synch with the motherboard, switch to the 8th mode

IMPORTANT NOTE:
make sure to connect the 3-pin header of the controller to the 3-pin header on the mot
herboard. do not connect it to the 4-pin header or unrecoverable damages will occur.

 

EXQUISITE ALUMINUM EXTERIOR

I/O ports panel front panel right side case feet

 

EFFORTLESS ASSEMBLY

PUSH AND HOLD TO UNLOCK THE TOP PANEL
screw-free, quick and easy

 

UPGRADED COOLING SUPPORT

Stronger airflow support for an additional 120mm fan at the rear
Enough room for a thick radiator at the bottom even when mounting dual gpu or vertical gpu

 

MULTIPLE TYPE OF PORTS TO SATISFY ANY NEED

4 x usb3.0 + 1 x type c + m|c rgb control buttons
2 x usb3.0 at top and bottom to catter to different usage scenarios

 

MORE FLEXIBILITY FOR GPU CONFIGURATION

8 slots to support dual gpu or vertically mount gpu
Supporting high-end gpus up to 169mm tall

VERTICAL GPU HOLDER
(SOLD SEPARATELY)

 

OPTIMIZED STORAGE LAYOUT

Interchangeable, more options for customisation possibility

THE HOT SWAPPABLE DRIVE BAYS
OFFERS ROOM FOR 4 DRIVES

4

6

3 INSIDE THE DRIVE PANEL BEHIND THE MOTHERBOARD

3 ON THE MOUNTING BRACKET BESIDE THE MOTHERBOARD
EACH SECTION IS REPLACABLE WITH 120MM FANS

 

O11D DISTRO-PLATE G1 DESIGNED BY EKWB

Multiple inlet and outlet ports
simplifies the water-cooling build process
argb lighting effect
come with a powerful ddc3.1 pwm water pump

Note:
In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.

  1. Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
  2. Install your GPU directly to the motherboard and start.
  3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)
  4. Save your settings and turn off the system
  5. 5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.
 
 

German Engineering Approved

The O11 Dynamic series from LIAN LI is developed in collaboration with DER8AUR, a world-renowned German overclocking, water cooling, and gaming evangelist. Always looking for ways to improve computer design and performance, DER8AUER volunteered his time to review and test the design concepts of the O11D series.

Starting with the first O11 Dynamic and up until the most recent models of the O11D series, LIAN LI appreciates the input from DER8AUER which helped make the O11D series exceptional cases, especially in terms of custom water cooling compatibility, ease of build, and features offered. As a result, DER8AUER’s seal of approval is elegantly displayed beside the LIAN LI logo, standing as a statement of quality and reliability.

COMPATIBILITY

DOWNLOAD

Colour:
Black
GTIN:
4718466009043
MPN:
O11D XL-X

New features

Manufacturer:
Lian Li

Cases

Case Form Factor:
E-ATX
Case Window:
Tempered Glass Front & Side
Case Lighting:
RGB Lighting
Case Slim Optical Bay:
+

Please choose your location for calculate shipping cost.