The GameMax Icon TG is a classic and modern looking Micro-ATX case combining the tempered glass panels, customisable ARGB lighting, astute airflow and an easy to build in layout, GameMax have ticked both the aesthetic and functionality points and created a well-rounded Micro-ATX chassis.
Behind the tempered glass sits three ARGB intake fans and for sufficient airflow cut outs can be found on the entire length of the front panel sides. Paired with another tempered glass side panel which is joined by an ARGB LED fan, making it four ARGB fans in total, control manually thanks to the built-in controller inside one of the front fans or ARGB Sync compatible allows you to enhance your PC with ambient lighting.
Support for another four fans and Water-Cooling support up to 280mm at the front or top for more demanding builds.
The interior is completely black, the enclosed PSU shroud contributes to a tidy look. Four hard drive positions are available, and three USB ports located on the I/O finish this case off nicely.
Want some of the most powerful hardware while looking good at the same time then the Icon is the perfect case.
GameMax Icon Glass Micro-ATX ARGB PC Gaming Case
| Dimensions | W | D | H |
| 214mm | 337mm | 410mm | |
| Weight | 5.0kg | ||
| Front Fan | Supports 3 x 120mm or 2 x 140mm Fans 3 x 120mm ARGB Fans included |
||
| Rear Fan | Supports 1 x 120mm Fan 1 x 120mm RGB Fan included |
||
| Top Fan | Support for 2 x 120 / 140mm Fans | ||
| Radiator Support | Front: Supports up to 280mm Top: Supports up to 280mm |
||
| 5"1/4 Bays | 0 | ||
| 3"1/2 Bays | 2 | ||
| 2"1/2 Bays | 2 Dedicated | ||
| Motherboard | Micro-ATX, Mini-ITX | ||
| Power Supply | ATX Supported | ||
| Material | Front: Plastic and Tempered Glass Structure: 0.5mm Steel Side: Tempered Glass |
||
| CPU Cooler | Max Height 165mm | ||
| Window | Tempered Glass left and front | ||
| Graphics Support | Max 330mm Length | ||
| Vertical Graphics | Supports vertical graphics if a riser cable is added | ||
| Expansion Slots | 4 Horizontal 2 Vertical |
||
| Hubs | Fan hub included for cooling / lighting. Supports 5v 3pin ARGB Motherboard Sync Fans use a proprietary 4pin connection |
||
| Connectors | USB 3.0 x 1 USB 2.0 x 2 Mic / Audio |
||
- Tempered Glass Panels - The Icon TG comes with two tempered glass panels, located on the front panel allowing for a finer view of the three included ARGB fans and finished off on the side creating an attractive display of your internal components.
- Two-Slot Vertical GPU Mount - Highlight your graphics card and bring more appeal and aesthetics to your final build thanks to the support for a vertical graphic card layout with dual PCI-E slots design.
- ARGB LED Fans - The four ARGB fans that are pre-installed are available with approximately 30 colour LED combinations, simply plug in the power and using the LED button easily switch between the LED modes and enjoy the visual experience.
- Motherboard Sync - Take your colour to new levels with the included Aura Sync Cable, easily connect the 3 Pin AURA to a 5V 3 Pin connection on a compatible motherboard and you can use the mobo software for system-wide lighting synchronization.
- Cooling Support - Extreme cooling potential with support for a total of eight fans with four pre-installed Top: Space For 2 x 120mm Fans & PSU Shroud: Space For 2 x 120mm Fans. This Micro-ATX casing also can fit up to a 280mm radiator at the front & top and a 120mm radiator at the rear of the case.
- Tempered Glass Panel - Showcase your components and ARGB LED lighting with a full tempered glass side window into your PC.
- MATX Chassis - From Mini-ITX to Micro-ATX Motherboards are compatible, graphics cards up to 330mm in length and CPU Cooler up to 165mm in height can fit into the Micro-ATX housing, making this the perfect case for PC fanatics.
New features
Cases
Customers also bought
