The new radiator generation from Phobya has arrived!
Innovation and cooling performance are the main arguments for this radiator! That's it? No! There is much more to this radiator when looking closer:
The choice of material is the basis for any great radiator. Copper fins, channels and chambers are make the G-Changer V2 to the most powerful Phobya radiator ever. The whole radiator was coated with a robust black lacquer. The fins are coated with a thinner layer to improve the appearance without compromising cooling performance. The Phobya logo was machined into the sides of the radiator to show that this radiator is a serious heat exchanger.
Based on the right choice of material and design the Phobya engineers have implemented many technologies to achieve outstanding cooling performance. The first idea was that improved flow rates result in improved cooling performance. Therefore the G-Changer series feature parallel double cooling channels to greatly reduce flow resistance of the radiator. The fin spacing and size was chosen to work efficiently even with medium-speed and slow fans to achieve the best noise- to performance ratio. The unique design of the fins of this 60mm thick heat exchanger additionally allows great performance increases when using High-powered fans which makes it extremely versatile and perfect for any application!
What good is great performance if the radiator is a pain to install? To make installation quick, easy and safe the engineers at Phobya came up with another innovative concept: The radiator is equipped with connection threads both on the front and bottom which greatly increases the possible mounting locations of this radiator. The two included black thread sealing plugs safely seal the two unused threads shut.
For easy deaeration of the radiator a bleeding screw was integrated at the highest point of the back of the radiator. When filling the system simply open the screw slightly until all air is bled from the radiator. Then screw the cross-slotted screw in again and you are set to go with a completely bled radiator!
Version 2 Full Copper
Please note: Screwing in the screws too far can damage the radiator. Always ensure the proper length of the screws. The included screw are not always the right size!
Important: Please thoroughly flush the radiator before use to remove possible residues from manufacturing and storage.