If you do not want to use this function you can use one thread above as inlet, so that the water runs into the reservoir from the bottom. Furthermore you can use that thread as outlet (for example if you do not want to use it with a pump and you want to have inlet and outlet at the same side of the reservoir) or use it for additional LED lightning or temperature sensors.
The fluid is collected in the bottom of the reservoir and due to the multiple hole plate the air goes out of the water very fast and the any cyclone or vortex is avoided. Under the hole plate is an additional basin where the water is stored and sucked from the pump. There is a big G1ö thread in which multiple pump adaptors can be screwed.
The top can be unmounted for filling and refilling or the top can be connected with a fillport (fillport not included). This allows an easy and fast filling of the water cooling system.
List of pump compatibility:
Already included are 3 adaptors, so that this reservoir can be used with the following pumps:
Eheim 1046/1048 and Aquastream, Alphacool 1046
Additionally you can order these adaptors separately:
Alphacool Lighttower adaptor for G1/4 (Art. 15049)
Alphacool Lighttower adaptor for Eheim 1260 (Art. 15050)
Alphacool Lighttower adaptor for Alphacool VPP655 / Laing D5 (Art. 15052) Technical data:
Type of reservoir: Tube reservoir
Pump compatibility: Phobya DC-12-220/260 Phobya DC12-400 Eheim 1046/1048
Material: POM / Plexi
Color: black / transparent
Volume: app. 250ml
Content of delivery:
1x Lighttower reservoir
2x Screw plug G1/4
1x Lightning module for 5mm LED
3x pump adaptor