The new Phobya pumps: A revolution begins!
After the first products the
manufacturer consortium Phobya now introduces a pump series which rattles the
cages in the performance-pump sector. This product perfectly combines all the
requirements from different watercooling users:
Quiet: At less than 22dB even most fans in the system emit
more noise. For decoupling and therefore further noise reduction two kits are
included with the pump: The first a map for quick and easy mounting on the case
floor. The mat is self-adhesive on both sides and therefore reliably fixates the
pump. The second possibility for pump installation are two brackets with which
the pump can be fixated in the case.
A ceramic-based centrifugal bearing promises quiet operation and a long
Compact: With the small outer dimensions (see technical
specifications) the pump can be installed in almost any corner of the case, even
in Midi- or Mini-towers. The compact dimensions of the pump also make connection
to the cooling loop easy as the pump's position can easily be varied.
Powerful: Such a small and quiet pump so far always required
compromises regarding the power. Not anymore! 2,6m of pressure head and 600l/h
of flow are the kind of performance that will not be stopped even by cooling
loops even with multiple waterblocks.
G1/4" connection: No adaptors, no annoyingly long connectors
any more! Simply screw in the desired connector and you are set to go!
12V connector: The first advantage of a 12V connector is
that it makes the connection with a 230V cable obsolete and that internal
operation is made safe and easy. The other great feature of this pump is the
connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan
connector which powers this pump (Important: Check the requirements and
capabilities of the sockets to which you connect the pump). This pump can
therefore be operated at a fan connector on a Mainboard or a fan controller.
This also allows a speed reduction of the pump: Only 8V are required for
starting and operation of the pump which makes it additionally quiet and smooth
in operation. The fan connector also offers the advantage of rpm monitoring with
a compatible controller.
Casing material: Plastic
Outer dimensions: (L x W x H): 61,7 x 59,7 x 46,7mm
Connection thread size: G1/4"
Power connector: 3-Pin
Nominal operating voltage: DC 12V
Starting voltage: DC 8V
Power consumption: 8W
Current draw: 1A
Max. pressure head: 2,6m
Flow rate: 600 l/h
Noise emission: below 22 db
Extent of delivery:
Decoupling bracket with 2x 4mm holes