Shop closed - Click and Collect Available only, use website for purchases.
Full info on repairs / collections etc on status / coronavirus page

Aquacomputer mps flow 100 G1/4

(£30.00 inc VAT)
List price: £43.50
Short description:
1/4" Thread, Requires Fittings
Range approximately 20 - 100 liters per hour

Aqua Computer flow sensors are easily integrated into your water cooling loop
and allow continuous flow monitoring. The mps flow series are technically based
on a differential pressure measurement and do not contain any rotating
components. Due to the high sensitivity of the integrated pressure sensors, the
sensors pose only a minimal flow resistance. In addition, the sensors are
extremely compact.The base part also has two M3 threads to be easily attached to
the PC case.

The mps flow sensors feature an integrated microcontroller with USB and aquabus
interface, a programmable alarm output, an integrated water temperature sensor
and an external temperature sensor input. For monitoring and configuration, the
aquasuite software can be downloaded free of charge. In addition to the USB
interface, the 4-pin aquabus interface can be used to directly connect the flow
sensor to an aquaero 5 controller (not included in delivery). The alarm output
can be configured to be used as a rpm signal to be connected to a fan connector
with fault detection (for example motherboard fan headers) or to be used as a
switched output for example to connect a LED. Flow signal, water temperature and
external temperature sensor input can be configured to raise an alarm. The
external temperature sensor input is compatible with all Aqua Computer
temperature sensors.

At the moment, three versions of the mps flow sensor are available that differ
in range. Please select the sensor best fitting your system:

mps flow 100: Range approximately 20 - 100 liters per hour / 5 - 26 US
liquid gallons per hour (Art. 53130)

mps flow 200: Range approximately 40 - 200 liters per hour / 11 - 53 US
liquid gallons per hour (Art. 53131)

mps flow 400: Range approximately 80 - 400 liters per hour / 21 - 106 US
liquid gallons per hour (Art. 53132)


Compatibility list aquabus interface:
aquaero 5 XT (art. 53125 and 53089)
aquaero 5 PRO (art. 53090)
aquaero 5 LT (art. 53095)Compatibility list external temperatue sensor input:
Temperature sensor inline G1/4 (art. 53066)
Temperature sensor inner/outer thread G1/4 (art. 53067)
Temperature sensor plug&cool (art. 53025)
Temperature sensor 70 cm (art. 53026)Scope of delivery:
One flow sensor
One internal USB cable
One aquabus/rpm signal cable (3 pins)Technical details:
Dimensions without fittings and without cables: approx. 55 x 34 x 21 mm
Connection threads G 1/4, fittings not included!
Mounting threads: 2x M3, distance 24 mm


New features


Please choose your location for calculate shipping cost.