G1/4 to 13mm (1/2") Fitting with O-Ring Black

£1.36
(£1.63 inc VAT)
Short description:
Our trusted fittings are available in a whole new design! Robust high-quality barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 13mm. With integrated 1/4" Perbunan(r) O-Ring seal. Technical...
8856
+

Our trusted fittings are available in a whole new design!

Robust high-quality barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 13mm. With integrated 1/4" Perbunan(r) O-Ring seal.

Technical specifications:
Thread size: G1/4
Thread length: 6mm
Compatible with hoses with an inner diameter of 13mm (1/2")
Fitting inner diameter: 10mm
Upper fitting outer ring: 15.8mm
Middle hose contact surface: 14.3mm
Key width: 16mm

Extent of delivery:
Black nickel barbed fitting with O-ring seal

Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required

+

Sorry, it seems that we have no shipping options available for selected location.