* 1* 4-pin molex Input and 6* 3-pin fan Output
* 6* LEDs to indicate the power on status
* Easy Installation
* Neat up your PC perfectly from messy fan wires
1. Plug it to 4-Pin female Molex of your PSU
2. LED indicators lighting means successful connection. If one or two failed to light, please check your connection again.
3. Just paste the unit to anywhere in your case with base adhesive tape.
Input Voltage: 12V
Output Voltage: 12V
Color of LEDs: Blue
Dimensions: H 8.8 cm X W 5.4 cm X D1.9cm