Our smart fan hub fits neatly easily inside any existing case, granting full software fan control across up to eight fans through our innovative CAM software platform.
- Six fan ports line the sides of the GRID+, while two included splitters allow you to control up to eight fans using a single GRID+.
- Custom fan naming allows you to monitor specific fans inside of CAM effortlessly.
- Preset fan profiles allow easy control, while our custom fan profiles allow you to create your own fan curve and have GRID+ raise/lower fan speeds based on temps.
- Full mobile control is planned to be released in Q3 2014 on Android and iOS through our CAM Mobile platform.
- Keep your PC safe with built-in over/under-volt and short circuit protection.
- The small form factor of the GRID+ allows you to discreetly install it anywhere in your case, making cable management easy.
||73mm x 18mm x 73mm
||Plastic, Acrylic, PCB
||Controlled via CAM Software
||5 x Zipties
2 x 3-Pin Female to 4-Pin/3-Pin Y extension cables
1 x Molex to phone jack connector
1 x Micro-USB cable
|Fan Connector Quantity
|Maximum Combined Wattage
||3M Dual Lock
||12V with Molex 4-Pin connector