The T-Balancer bigNG is the first 4-channel
controller for air and watercooling with patented Dual Mode Technology (DMT).
You can choose whether you want to power each channel analog or with PWM. The
T-Balancer bigNG delivers pure analog voltage up to 20W per channel (40W with
PWM). This way you can even connect water pumps or Peltiers. An integrated
heatsink ensures a cool running.
The bigNG will be delivered by standard with 4 thin analogue sensors and 2 precise digital
sensors. Due to the high absolute accuracy of the digital sensors you can
calibrate the rest of your system to it. Using all available extension you can
control all together 10 analogue sensors, 8 digital sensors and 2 flowmeters.
Mounting is very flexible: in a free 3.5" bay, in a free chassis slot or anywhere with the orange
fluorescent acrylic glass.
What can the T-Balancer bigNG control? The bigNG can read up to 10 analogue sensors, 8
digital sensors, 2 flowmeters and the speed of 4 fans. It can control fans,
powerful waterpumps, CCFLs and even Peltiers. It can be connected to the PC with
USB. The RPM signals can also be connected. With the Extension Set analogue, the
PC can also be shut-off in a case of emergency.
Which extensions exist for the T-Balancer bigNG?
Extension set digital (6 more digital sensors), extension set analogue (6 more
analogue sensors, emergency PC power off, connector for 2 flowmeter), 2
T-Balancer miniNG (more fan channels), Waterkit (with flowmeter and water temp
probes), filling-level meter (in development)
The T-Balancer bigNG offers numerous safety systems: overheat protection, acoustic
alarm, optic alarm, software alarms, sensor loss control, blockage recognition,
With Software (via USB2.0) the T-Balancer can be adjusted and configured in an easy way. Many
Plug-Ins (iMON, Speedfan, MBM, JaLCD, LCDC, Samurize) are provided for the
T-Balancer software. The software also enables long-term monitoring, an
integrated USB watch-dog ensures a permanent USB connection.
Control unit, 2 digital sensors (address #0-#1), 4 analogue sensors, RPM signal
cable, USB cable (internal), acrylic case, slot sheet, 3.5" bay holders, CD with
max. current: 7A
max. power: 80W (PWM)/20W (analogue)
power per channel: 40W (PWM)/20W (analogue)
Fan connection : 3pin, also supports some 4pin PWM fans (those capable of
running on a 3pin header)