In Duplicator Mode, it creates an exact 1-to-1 sector clone from one hard drive to another, including partition and boot sector information and all data, at a rate of ~72MB/second, ensuring data integrity and consistency for sensitive operations (data recovery, etc.).
In Dock Mode, it can be connected to your host computer through USB 3.0, supporting up to 5 Gbps of bandwidth from both hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.
The value of this hard drive docking station can be further extended through a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.
Warranty Information | |
---|---|
Warranty | 2 Years |
Hardware | |
Interface | USB 3.0 |
Bus Type | USB 3.0 |
Number of Drives | 2 |
Drive Size | 2.5in & 3.5in |
Drive Type | SATA |
Drive Installation | Removable |
Fan(s) | No |
Chipset ID | JMicron - JMS551 |
Connector(s) | |
Drive Connectors | 2 - SATA Data & Power Combo (7+15 pin) Receptacle |
Host Connectors | 1 - USB 3.0 B (9 pin; SuperSpeed) Female |
Performance | |
Type and Rate | USB 3.0 - 5 Gbit/s |
SATA II (3 Gbps) | |
Max Drive Capacity | Currently tested with up to 4TB 5400 RPM hard drives per bay (8TB total) and 1TB 5400 RPM 2.5" hard drives (2TB total) |
Software | |
OS Compatibility | Windows XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8 (32/64-bit) Mac OS 10.4/ 10.5/ 10.6/ 10.7/ 10.8 Linux |
Physical Characteristics | |
Color | Black |
Enclosure Type | Plastic |
Product Length | 128 mm [5 in] |
Product Width | 103 mm [4.1 in] |
Product Height | 62 mm [2.4 in] |
Product Weight | 562 g [19.8 oz] |
Indicators | |
LED Indicators | 1 - Duplication Progress (Blue) |
1 - Power (Green) | |
2 - Drive Power/Activity (Blue) | |
Power | |
Power Adapter Included | Yes |
Output Voltage | 12 DC |
Output Current | 4A |
Center Tip Polarity | Positive |
Environmental | |
Operating Temperature | 0?C to 85?C (32?F to 185?F) |
Storage Temperature | -10?C to 95?C (14?F to 203?F) |
Humidity | 5% ~ 90% RH |
Special Notes / Requirements | |
Note | For duplication, the destination drive must be of equal or greater capacity than the source drive.
If the source drive contains an EISA (Extended Industry Standard Architecture) partition, the EISA partition needs to be removed prior to beginning the duplication. If used with the Apple Mac OS operating system, this device will function in USB 2.0 mode only as USB 3.0 is not currently supported by Apple. |
Packaging Information | |
Package Quantity | 1 |
Shipping (Package) Weight | 722 g [25.5 oz] |
What's in the Box | |
Included in Package | 1 - Hard Drive Duplicator |
1 - USB 3.0 Cable | |
1 - Software CD | |
1 - Power Adapter | |
1 - Instruction Manual |