Notice Digital Everywhere FloppyDTV S2 Tuner has zero inventory and cannot be added to the cart

Digital Everywhere FloppyDTV S2 Tuner

(£158.71 inc VAT)
Short description:
Satellite Tuner Card with Common Interface
Out of stock
Looking to view or record SkyTV on your PC? Then you need the following :

Follow the first part of this guide for info on how to prepare the CAM module and pair your viewing card ! Note that this allows single channel recording only and the viewing card must be kept 'alive' by putting in a Sky UK box occasionally.

Main Features

Support for  HDTV Channels - DVB-S and DVB-S2 receiver- Software decoding of MPEG2 and MPEG4 / H.264 - Watch and record TV in the highest available quality

warning.jpg Read the "System requirements" below!

 Support for PayTV Channels- Integrated Common Interface , watch and record Free To Air or PayTV channels - Compatible with most popular CAMs- Tested with several PayTV providers


warning.jpg PayTV requires a CAM and a valid smartcard (Subscription)

Fully integrated in Windows Media Center   mce_50.jpg    vista_50.jpg
- Easy to use in Windows Media Center    
- Driver for Windows Media Center in Vista64 are also available in the download section

warning.jpg Windows Media Center doesn't support MPEG4/H.264 channels!!!



Integrated in most popular Media Center Software

- Fully integrated in many TV Software like DVBViewer Mediaportal

- Driver for Vista 64 bit also available in the download section

new.jpg Now FireDTV S2 also works with EyeTV 3 on Apple Computers !





Fits in almost any computer!

- FloppyDTV S2 can be mounted on any PCI, PCI-Express, AGP or empty slot

- Need only a single PCI Slot

- Connection to the computer through FireWire (IEEE1394)

- Easy connect more than one FloppyDTV thanks to the integrated FireWire Repeater

- Also suitable to be mounted on 3,5" Floppy Drive Bay (additional adapter available separately)

- Download the Assembly Guide



System requirements  

- FireWire (IEEE1394) port on board or with OHCI-adapter
- For PayTV: CAM-Module, valid subscription/smartcard
- For Windows Media Center in WinMCE 2005: RollUp2, MPEG2 software decoder
- For Windows Media Center in Vista: Vista Home Premium or Vista Ultimate
- For other compatible TV software: Windows XP SP2 or later, MPEG2 decoder
- For SDTV: Pentium@ IV 1,5GHz, AMD Athlon XP+ 2000
- For HDTV: Minimum: Pentium@ IV 3,5GHz, AMD Athlon XP+ 3500, DXVA/H.264 graphic card (Windows XP)  
                 Recommended: Dual Core processor (REQUIRED for WinMCE 2005 or Vista)
- For H.264 channels: H.264 software decoders

Front End features

- Antenna Connector: F-Type 75 Ohm
- Input Frequency Range: 950-2150MHz
- Supported Modulation: 8PSK/QPSK (DVB-S2), QPSK (DVB-S)
- LNB Supply, 13/18V, 22KHz tone, max. 400mA
- DiseqC: 1.0, 1.1, 1.2 (depending on used Software)

Included in the "FloppyDTV S2"  

- FloppyDTV S2, with pre-assembled power cable and FireWire cable (also suitable for connection to the motherboard)
- Printed Assembly and Quick Install Guide
- Setup CD with BDA and Windows Media Center driver for WinMCE 2005 and Vista 32Bit (Home Premium or Ultimate)
- FireDTV Viewer Software to watch and record TV channels. Vista 32 and 64 capable, H.264 capable

 warning.jpg  MPEG4 / H.264 Software decoders are NOT included in the FloppyDTV S2 package

Accessories (sold separately)

A "FloppyDTV Extension KIT" is also available and includes:

- 3,5" FloppyDTV Adapter
- Remote control
- MPEG2 / MPEG4 Software decoders (Main Concept)
- CD with Drivers and FireDTV Software


Sorry, it seems that we have no shipping options available for selected location.