The mesh front panel offers efficient airflow for demanding systems.
Large intakes on each side of the front panel pay tribute to high performance cars.
Three 120mm RGB LED fans in front are pre-installed to create an amazing lighting effect.
One RGB controller is included in the accessory pack. If your motherboard does not support the RGB control function, you can connect the RESET button and control the RGB lighting directly from the I/O panel.
Optimized airflow due to the semi-meshed front panel and ventilation holes on top of the case.
Front: Three 120mm or two 140mm* fans and up to a 360mm radiator with a maximum thickness of 50mm without fans.
Top: Two 120mm or two 140mm fans and supports a 120mm or a 240mm radiator.
Rear: One 120mm fan or radiator. All to ensure you don't have to compromise on performance.
*2 x 140mm fans in front can only be mounted behind the front plate
Showcase your build and system lighting effect through the 4mm-thick tempered glass side panel. The side panel bracket hinges on an angle during removal, while two "captive" screws are held in place with rubber so they are not misplaced.
The MB511 RGB case supports CPU Coolers up to a height of 165mm, Graphic Cards up to a length of 410mm and Power Supplies up to a length of 180mm.
|Materials||Steel, Plastic, Tempered glass|
|Dimensions||496(L) x 217(W) x 469(H) mm|
|Motherboard Support||ATX (up to 272mm width), Micro-ATX, Mini-ITX|
|5.25" Drive Bays||No|
|Combo 3.5"/2.5" Drive Bays||2 (Max. 2)|
|SSD Drive Bays||5 (Max. 6)|
|I/O Panel||USB 3.0 x 2, Audio In / Out|
|RGB Control||RGB controller included
1 to 3 RGB splitter cable included
|Pre-installed Fan(s)||Front: 120mm RGB Fan x 3
Rear: 120mm x 1
|Fan Support||Top: 120mm x 2 / 140mm x 2
Front: 120mm x 3 / 140mm x 2 (can only mount behind the front plate)
Rear: 120mm x 1
|Radiator Support||Front: 120 / 140 / 240 / 280 / 360mm radiator. (75mm clearance)
Top: 120 / 240mm
|Clearances||CPU Cooler: 165mm / 6.49"
PSU: 180mm / 7.08"
Graphics card: 410mm / 16.10"
|Cable Routing||Behind MB Tray: 19mm / 0.74"|
|Dust Filters||Front, Top, Bottom|
|Power Supply Support||Bottom mount, ATX|