Case Decal Vertical Logo Stack

Use this page to build a vertical decal stack.

There is an additional starting cost to build the artwork, then each logo adds an additional £1.20, with the exception of the Kustom logo, which is offered for free if you would like to include that in your stack.

Surfaces - The materials are intended to be applied to smooth surfaces. Avoid installing decals on surfaces with a bumpy finish, as they may not stick.

Order

The logos are placed in the order you specify eg Decal 1 at the top, Decal 2 below and so on.

Colour

See the product images to see a real-life photo of all the materials.

Application

Use application as 'normal' for a decal you want to apply outside of a case. Any colour is suitable.

Use 'reversed' when you want the graphics to be mirrored so that they read the correct way around when placed inside of a window. Use only with matt finish or etch effect colours - do not use metallic or carbon effects as these are not finished on the inside.

Use 'stencil' to get the the design peeled out and have a stencil so that you can use this as a paint template. Pick the 'stencil material' as your colour choice.

Sizes

On the vertical stack, the width is the main definition of the overall size - pick a width and we will size all of the logos to be the same fixed width to keep them in a block.

(Optionally) - If you have a limit on space vertically, choose so in the maximum vertical size field, and we can make sure that the final design fits within this space and will resize the width proportionally to fit. If this option is not specified, we'll simply keep the stack in proportion to the chosen width.

Need anything else?

Send us a message (see Product Enquiry tab below, or the contact link at the top of the website) if you need any assistance or want to suggest another brand to add to the stack options.

Installation Guide - See our Case Decal Application Guide here.