Main Features

Support for  HDTV Channels - DVB-S and DVB-S2 receiver - Software decoding of MPEG2 and MPEG4 / H.264 - Watch and record TV in the highest available quality   Read the "System requirements" below!

Support for PayTV Channels - Integrated Common Interface , watch and record Free To Air or PayTV channels - Compatible with most popular CAMs (use a Dragon/T.Rex for SKY UK)   PayTV channels require a CAM and a valid smartcard (subscription)

   Windows Media Center doesn't support MPEG4/H.264 channels!!!

- FireWire (IEEE1394) port on board or with OHCI-adapter

- For PayTV: CAM-Module, valid subscription/smartcard

- For Windows Media Center in WinMCE 2005: RollUp2, MPEG2 software decoder

- For Windows Media Center in Vista: Vista Home Premium or Vista Ultimate

- For other compatible TV software: Windows XP SP2 or later, MPEG2 decoder

- For SDTV: Pentium@ IV 1,5GHz, AMD Athlon XP+ 2000

- For HDTV: Minimum: Pentium@ IV 3,5GHz, AMD Athlon XP+ 3500, DXVA/H.264 graphic card (Windows XP)  
                  Recommended: Dual Core processor (REQUIRED for WinMCE 2005 or Vista)

- For H.264 channels: H.264 software decoders

Front End features

- Antenna Connector: F-Type 75 Ohm

- Input Frequency Range: 950-2150MHz

- Supported Modulation: 8PSK/QPSK (DVB-S2), QPSK (DVB-S)

- LNB Supply, 13/18V, 22KHz tone, max. 400mA

- DiseqC: 1.0, 1.1, 1.2 (depending on used Software)

Included in the "FloppyDTV S2"  

- FloppyDTV S2, with pre-assembled power cable and FireWire cable (also suitable for connection to the motherboard)

- Printed Assembly and Quick Install Guide

- Setup CD with BDA and Windows Media Center driver for WinMCE 2005 and Vista 32Bit (Home Premium or Ultimate)

- FireDTV Viewer Software to watch and record TV channels. Vista 32 and 64 capable, H.264 capable

   MPEG4 / H.264 Software decoders are NOT included in the FloppyDTV S2 package