 The CPU cooler’s height is 66mm and designed to be installed in ATX case as well as slim or LP (low profile) cases.
| Overall Dimensions | W | D | H | | 108mm | 108mm | 66mm | | Weight | 330g | | Heatsink Material | Copper Base, Aluminium Fins | | Dissipation Area | 2,872cm2 | | Mounting Type | Backplate and Clip | | CPU Sockets | Intel LGA 1155, 1156,1366 , 775
AMD FM1, AM3, AM2, 754, 939, 940 | | Fan Size | 92mm | | Fan rpm | 1,400 ~ 2,800rpm ± 10 % | | Fan Noise | 20 ~ 32dBA ± 10 % | | Fan Airflow | | | Fan Connector | 4pin PWM | | Thermal Grease | ZM-STG2M Grease Included |
|
   Fluid Shield Bearing With FSB (Fluid Shield Bearing) bearings, the fan’s lifespan and noise is improved considerably compared to previous sleeve bearing fans, while the fan noise has been noticeably reduced. | | Ultra Quiet 92mm PWM Fan Switching noise eliminated 4 Pin 92mm PWM fan is incorporated for ultra quiet operation.
※ ‘Switching noise’ is the high frequency harmonic noise that can result from voltage regulation. |
 Powerful Cooling Performance Four heatpipes and aluminum fins are designed for maximum cooling while switching noise free, down-blowing 92mm fan minimizes noise and cools not only the CPU but also provides powerful peripheral cooling.
※ Dissipation Area: 2,872㎠
※ ‘Switching Noise’ is the high frequency harmonic noise that can result from voltage regulation. | | Slim Profile The CPU cooler’s height is 66mm and designed to be installed in ATX case as well as slim or LP (low profile) cases. |
 Versatile Compatibility ZM-STG2M The CNPS8000B accommodates a broad range of sockets.
- Intel LGA1156/1155/1366/775
- AMD FM1/AM3+/AM3/AM2+/AM2 | | Easy Installation The cooler installation clip and bolt are designed as one-piece, making installation convenient, and the patented back plate prevents flexing of the motherboard. |
 | High Performance Super Thermal Grease ZM-STG2M The high performance super thermal grease ZM-STG2M maximizes heat transfer from the CPU to the base of CNPS8000B for intensified cooling performance. | | |
  |  Common Components | | - Cooler
- Backplate
- Side Caps
- Nuts
- Screws
- Loading Block
- Double-sided Tape
- Thermal Grease (ZM-STG2M)
- User’s Manual | | | | Components for Intel | | | - Intel Clips | | | | Components for AMD | | | - AMD Clips |
|
|
 Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.  | Do not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. | |  | To prevent possible injuries, gloves must be worn while handling this product. | |  | Excessive force exerted on the fan may cause damage to the fan and/or system. | |  | Use and keep product away from reach of children and pets. | |  | Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement. | |  | Zalman Tech Co., Ltd. is not responsible for any damages due to overclocking. | |  | During transportation of the system, the cooler must be removed. Zalman is not responsible for any damages that occur during the transport of a system. | |  | Product design and specifi cations may be revised to improve quality and performance. | |  | Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing. |
|
|
|
