 |
 |
Designed
for Low
Noise &
Optimal
Cooling |
|
|
|
 |
 Noise & Vibration Preventive Structure
All sides of the GT1000 are comprised of aluminum material of 4~5mm thickness and have each been assembled by an engineer to provide a firm enclosure with noise and vibration preventions. Furthermore, the connection part for the HDD (Hard Disk Drive) is made of rubber rollers and dampers, which serve to capture the vibration and noise from escaping.
|
|
Optimal Airflow
The GT1000 enclosure is designed to maintain optimum internal temperature at all times, incorporating two 92mm LED Front Intake Fans and a 120mm Rear Exhaust Fan for high volume airflow through the system at low fan RPM for high performance cooling with quiet operation, and accommodates even the hottest CPUs that generate over 130watts of heat. |
|
|
|
|
 |
|
Designed
for HDD with High TDP
The latest high
performance HDDs have
high generation of heat
due to high RPM. The two
92mm LED Front Intake
Fans draw in cool air
from the outside into
the system. As HDD is
the first component to
be cooled by this cool
air, the decrease in the
product’s life
expectancy and the
occurrence of data error
caused by high heat are
minimized. |
|
Control
of Noise & System
Cooling
The ZM-MC1 is provided
with the GT1000, which
allows the control of
fan RPM according to the
ambient environment
(temperature, humidity,
etc.) Thus, the user can
manually control the fan
RPM to control the
levels of noise and
internal system cooling.
|
|
|
| |
 |
Various
Features & Convenience |
|
|
|
 |
|
One
Touch-Opening Door Side Panel
The side panel is designed to be
opened with a one touch opening
door method. Thus, the side
panel can be opened without the
use of any special tools, which
makes it convenient for users
who have frequent component
changes. |
|
Convenient
Front Input/Output Ports
The Front I/O Port includes
sockets for speakers
(headphones), microphone, 2 USB
devices, and a 1394 (Firewire)
device for convenient system
access. Audio sockets support HD
Audio (Azalia) and AC’97
specifications. |
|
| |
 |
Tool-free
installation
1) Tool-free HDD installation
Patent pending design that
incorporates anchored spinning
bars with cylindrical rubber
wheels allows the user to
install and remove the HDD
simply by rolling the HDD in and
out of the chassis without
having to use any tools.
Furthermore, there is sufficient
space in the lower section of
the enclosure where two HDDs can
be installed in a tool-free
manner.
2) Tool-free 5.25” installation
The hand bolts are fixed onto
the 5.25” bay at all times,
which allows the installation
and removing of the 5.25” driver
in a tool-free manner.
3) Tool-free Expansion Card
installation
Hand bolts (not standard bolts)
are used for installing and
removing the expansion cards,
which allows tool-free
installation. |
|
| |
 |
Elegant
Design |
|
|
|
 |
|
Unlike typical cases that only
incorporate a thin aluminum
facade front cover, the entire
GT1000 enclosure incorporates
firm 4-5mm thick anodized pure
aluminum panels that prevent
system vibration, reinforce
system cooling by dissipating
internal heat, and provide the
highest in aesthetic quality. |
|
The
three LED fans with altering
brightness depending on the
fan’s RPM provide greater
aesthetic quality. |
|
| |
|
|
| |
|
